Extron electronic - MLS 304

Below are all the different types of Extron electronic. Select the device of your choice, to download the manual

Contents

Plug the output cable from fhe power supply to the RGB s power input connector Plug the RGB s power output cable to the power supply s 2 pin power input connector Install standoffs 2 Install screws 2 10 Connect the switcher s power output cable to the power supply s 2 pin power input connector See the previous illustration 11 Connect power output cable from the power supply to the switcher s power input connector See the previous illustration 12 Install the insulator and attaching screws that were removed in step 7 Position insulator under the heat sink Fasten the insulator to the standoffs CAUTION The insulator must be tucked under the heat sink to protect components from possible damage 13 Replace the top ...